第三章创建选区.ppt

Class Example Example1：Ads To use some material image, use our lesson learned by making ad images. As shown in Figure 3-2-1. Figure 3-2-1 操作步骤 1．新建一个图像文件，并打开素材文件，将素材文件中我们所需要的主体用钢笔工具描边后获取主体。如图3-2-2、图3-2-3所示。 图3-2-2 图3-2-3 Steps: 1．Create a new image file, and open the material file, the material file we need to use the Pen tool strokes after the main access to the principal. Figure 3-2-2, as shown in Figure 3-2-3. Figure 3-2-2 Figure 3-2-3 将路径转化为选区，去除多余部分，拖曳到我们的主图像中。如图3-2-4所示。 图3-2-4 Converselection into the path, remove unnecessary part of the main drag in our image. As shown in Figure 3-2-4. Figure 3-2-4 2．Now our image seems hollow, we need to enrich the image and then some, we use a symbolic image, highlighting the theme of our advertising. Depicted with the pen tool, and depict the path after them into constituencies, to remove unnecessary parts, the main drag in our image. Figure 3-2-5, as shown in Figure 3-2-6. Figure 3-2-5 图3-2-6 Figure 3-2-6 3．广告主体我们用钢笔工具进行描绘选取，再与广告主体进行组合。现在广告主体我们已经制作完成，输入广告词后即可全部完成，如图3-2-7所示。 图3-2-7 3． the main of Ads we use pen picture selection, and then be combined with the advertising subject. Now we have finished the main ad, enter the ad immediately after completion, as shown in Figure 3-2-7. Figure 3-2-7 操作步骤 1．新建一张图像文件，其宽度和高度分别为374像素、456像素，然后打开风景图，要在工具箱中选择“移动工具”，将风景图像的图像图层用拖拉的方法复制到新建图像文件，然后使用“移动工具调整图像图层的位置。如图3-3-1所示。 图3-3-1 实例2：综合练习 Steps 1．Create a new image file, its width and height of 374 pixels, 456 pixels, and then open the landscape plan, in the toolbox, select Move Tool to view the image of the image layer method using drag an image file copied to the new , and then use the mobile tool to adjust the location of the image layer. shown in Figure 3-3-1. Figure 3-3-1 Example2：Exercises 原始素材图3-3-2 图3-3-3 Original material image 3-3-2 Figure 3-3-3 现在显得分割比较明显，我们将风景添加一个图层蒙版，并拉一个由上到下的黑至白的渐变。如图3-3-4所示。 图3-3-4 Now it Seems more obviously split, and we will add a layer mask landscape, and pull on to the next by a