盐城兴安GSB-2C英文说明书.docVIP

GSB-2C Series Hydraulic swing arm cutting machine Instruction Manual Yancheng City Xingan Machinery Factory Dear Users: Thank you for using our GSB-2C(1D) series hydraulic swing arm cutting machines. Please read this instruction book carefully before using them to guide your operation.. (If the technical specifications in this instruction book changes, we are sorry we can not notify you!) Contents Usage and features of the machine Main technical parameters Installation of the machine Debugging of the machine Maintenance and Upkeep of the machine Common Faults and elimination methods Notes Attached drawings 1. The usage and features of the machine (1) The usage The GSB-2C(1D) series hydraulic swing arm cutting machines are mainly used in industry to cut the soft plastic sheet, leather, fiber, cotton textiles, cardboard or other similar materials by die cutting. (2) The features ①Flywheels use the inertia storing energy, instantaneous cutting materials, and the cutting force is large, energy consumption is low. ②Column, arm, piston and other parts are all made of high quality steel and durable in use. ③There is an automatic oil supply function. It can lubricate the system automatically, which will help reduce abrasion and extend the life time. ④The precision is high and the cutting quality is improved by using the electronic time delay circuit to control the lower limit position of the stroke. Using the hand wheel to adjust the height from the arm to the work table is easier, more convenient and safer when you are going to choose the die cutting and material ⑤The cutting pressure is mainly the following: 100KN, 120KN, 180KN, and 200KN; The width of the arm contains: 300mm, 320mm, and 350mm; The above types can meet the different production requirements of different customers. 2. Main technical parameters Series GSB-2C/10 GSB-2C/12 GSB-2C1C/12 GSB-2C/18 GSB-2C/20 The maximum blanking pressure 100KN 120KN 120KN 180KN 200KN The size of the arms 300×400 320×450