房建工程钢管敷设施工工艺.docxVIP

房建工程钢管敷设施工工艺 1 scope This process is applicable to steel tube, dark dressing, ceiling and inner steel pipe laying in the lighting and power wir ing. Construction requirement 1 material requirements: 1. 1 galvanized steel tube (or wire tube) wall thick and uniform, the seam is even, no splitting, grinding, rib and concave? Apart from the galvanized pipe pipe to be cleaning brush anti-corrosion paint in advance (cast-in-site concrete embedment, don，t brush anti-corrosion paint, but should be rust removing) galvanized pipe steel pipe coated or painted anticorrosive paint surface integrity, no peeling phenomenon, should have the material list and quality certificate? pipe hoops with a centro tube. Silk and clear and unbuckled, the zinc coating is complete without peeling, no splitting, the ends are smooth without burrs, and there is a product certificate? 2. 1. 3 lock nut (root mother) is in good shape, with clear thread and product certificate? The 2.1.4 protector has the differenee between thin and thick pipe, the mouthpiece is intact, and has the product certificate? 1. 5 iron lamp box, switch box, junction box, such as metal plate thickness should be not less than 1. 2 mm, the galvanized layer without peeling, no open welding deformation, intact, struck down hole panel mounting holes and ground wire welding feet is complete, and the product certificate? 2. 1. 6 of the specifications of the panel, flat, high and wide, from mounting holes should be matched with the box, appearance is intact, panel color uniform, and the product certificate? The materials such as 2. 1.7 steel, flat steel and Angle steel should meet the requirements of the relevant regulations of the state, the zinc coating is intact and the products are certified? 2. 1. 8 bolts, screws, pipe bolts, nuts and washers should be made of galvanized? Other materials (such as lead wire, electrode, antirust paint, cement, oil, etc?)have no overdue metamorphosis? main tools: 2. 2. 1 simmer, hydraulic pressure