500kV隔离开关二次回路防误改进.pdf

Transmission and Distribution Engineering and Technology 输配电工程与技术, 2015, 4, 21-25 Published Online June 2015 in Hans. /journal/tdet /10.12677/tdet.2015.42003 The Improvement of Control Circuit of Preventing Misoperation of the 500 kV Isolating Switch Lei He, Yong Zhang, Liang Cao Central Southern China Electric Power Design Institute, Wuhan Hubei Email: ham2003001@163.com th th th Received: Jun. 11 , 2015; accepted: Jun. 26 , 2015; published: Jun. 30 , 2015 Copyright © 2015 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract This paper introduces the control circuit of 500 kV Isolating switch which adopts AC control loops in the 500 kV substation, and which adopts DC control loops in the ±800 kV converter station in Pu’er. The security hidden danger of auto closing and opening without permission of 500 kV Iso- lating switch adopting DC control loops is discussed. An improvement of eliminating the hidden trouble is put forward by installing three-phase power monitor in the motor operation loop and accessing the auxiliary contacts of power monitor to control circuit of each phase. And the running effect is good in the converter station in Pu’er after the improved method is applied. Keywords Converter Station, 500 kV Isolating Switch, the Control Circuit, Misoperation Prevented, TVR 500 kV隔离开关二次回路防误改进 贺 磊, 张 勇, 曹 亮 中南电力设计院, 湖北 武汉 Email: ham2003001@163.com 收稿日期：2015年6月11 日；录用日期：2015年6月26 日；发布日期：2015年6月30 日 21 500 kV 隔离开关二次回路防误改进 摘 要 本文介绍了500 kV交流站中采用交流控制回路的500 kV隔离开关的二次回路，以及普洱±800 kV换流站 中采用直流控制回路的500 kV隔离开关