换热器制造工艺指导流程.docVIP

浮头式换热器制造工艺作业指导书 Floating head heat exchanger manufacturing operating instructions 编制/日期： 校对/日期： 审核/日期： - PAGE 4 - 筒节 Tube section 1.材料确认：在材料管理员的指导下，对材料的标记确认。 Confirm material: under the guidance of materials administrator ,recognized the mark of the material。 2.根据工艺排版图将板料平铺于切割架上，号料划出切割线、刨边线、检查线。 According to process diagram ,layouting the material board on the shelves, cutting and draw the cutting line, plane edge, checking line. 3.坡口加工（见坡口工艺卡），完成后对坡口进行超声检测。Groove processing (see groove process card), Ultrasonic testing after