南京理工大学机械原理chapter5cammechanism课件讲解材料.pptVIP

Theory of Machines and Mechanisms (机械原理);Chapter1 Introduction Chapter2 Structural Analysis of Planar Mechanisms Chapter3 Kinematic Analysis of Mechanisms Chapter4 Planar Linkage Mechanisms Chapter 5 Cam Mechanisms Chapter 6 Gear Mechanisms Chapter 7 Gear Trains Chapter 8 Other Mechanisms in Common Use Chapter 9 Balancing of Machinery Chapter 10 Motion of Mechanical Systems and Its Regulation Chapter 11 Efficiency of Machine;Chapter 5 Cam mechanisms;本章重点： 凸轮机构分析:包括用反转法确定从动件的运动规律和机构压力角。 凸轮机构设计：包括常用运动规律的特点及选择，盘状凸轮轮廓设计，以及凸轮机构基本尺寸的确定。 本章难点： 反转法思想的建立和应用。;Chapter 5 Attentions 1.Classification of cam 2.Follower motion curves 3.How to design the pitch curve and cam contour 4. Pressure Angle, the Radius of base circle, Radius of Curvature ;5.1Characteristics and Classification of Cam Mechanisms;5.1.1 Characteristics of Cam Mechanisms;5.1.2 Classifications of cam Mechanisms;(b) Translating cam ;(c) three –dimensional cam;2.By the motion type of the follower ;(b) Oscillating follower ; 3.By the shape of the follower end ;(c). flat-faced follower ;4 By the manner of keeping the cam and the follower in contact ;进刀机构;5.2 Follower Motion Curves (从动件运动规律 );行程h—total follower travel,the lift ;二、分析从动件的运动;行程h—total follower travel,the lift-最大位移;displacement curve位移曲线 求导得速度，加速度图;5.2.1 Constant velocity Motion Curve 匀速运动规律（推程段） ;5.2.2 Constant Acceleration and Deceleration Motion Curve (等加速等减速运动规律);5.2.3 Cosine Acceleration Motion Curve 余弦加速度运动规律 （simple harmonic(简谐) motion curve）;5.2.4 Sine Acceleration Motion curve 正弦加速度运动规律 (cycloid（摆线） Motion curve);5.3 plate Cam with Translating Roller (or knife-edge) ;5.3.1plate Cam with Translating knife-edge follower直动从动件盘形凸轮机构;1、画出基圆、偏距圆，尖底从动件的起始位置C0(B0) 。;Note：;5.3.2 Graphical Synthesis of Plate Cam with Translating Roller follower. ;Roller center?reference point. ; Are there any other methods to find the cam contour?;