燃气行业中波纹管调长器与波纹补偿器的区别及选型_安装建议.docxVIP

燃气技术GAS TECHNOLOGY燃气行业中波纹管调长器与波纹补偿器的区别及选型、安装建议西安秦华天然气有限公司 燃气技术GAS TECHNOLOGY 燃气行业中波纹管调长器与波纹补偿器 的区别及选型、安装建议 西安秦华天然气有限公司( 710068) 西安燃气监督管理中心( 710082) 任 张 鑫 明 严 静 摘要 由于 CJJ51- 2006、CJJ33- 2005 两部规范中, 对“波纹管调长器”与“波纹补偿器”的运行、安装要求有所不同。本 文对燃气行业中波纹管调长器与波纹补偿器的区别进行讨论, 并对其选型及安装提出相关建议。 关键词 燃气行业 波纹管调长器 波纹补偿器 The suggestion on adjustment, operation and installation between the bellows- type compensator and the bellows- type Xi′an QinHua Natural Gas Co.( 710068) Ren Xin, Yan Jing, Zhang Ming Xi′an Supervisory and Administrative Centre( 710082) Zhang Ming Abstr act According to different requests about operation and installation of the bellows- type compensator and the bel- lows- type adjustment are put forward in CJJ51 - 2006、CJJ33 - 2005 (City gas industry standards),the essay discusses the distinctions between the bellows- type compensator and the bellows- type adjustment,gives some proposals on its operation and installation. Keywor ds gas industry the bellows- type compensator the bellows- type adjustment Practice″Harnmonisation of Naturat Gas Quality 03 / 02 /2005 (CBP 2005- 001 /01) 4 MARCOGAZ.National situations vagarding gas quality Rerort prepared by MARCOGAL Working groap″GAZ QUALITY″29 /11 /02 5 Marcogag WG《Gas Quality》 lst Position Paper on European Gas Quality Speci- fications.20 /02 /2003. 6 The LNG Industry 2004 G11GNL. 参考文献 1 Rob klein Nagelaoort (The NETHERLANDS) Re- port of Study Groep D I ″LNG quality″,The 23rd Wored Gas conference,5- 9 2006,Amstardam- NL. 2 Towards A Harmonised EU Specification on Gas Quality:MARCOGAI Contribution.The 23rd World Gas Conference,5- 9 2006,Amstardam.NL 3 EASEE- gas (Earopean Association for the stream- lining of Energy Exchange - gas):Common Business 11 | w w w .c h in a g a s.o rg .c n | 燃 气 技 术城市燃气2008 /4 (Vo l.398)1 燃 气 技 术 城市燃气 2008 /4 (Vo l.398) 1 引言 型波纹补偿器称之为调长器。波纹管调长器实质是 波纹补偿器根据燃气行业的特征, 专门制作的补偿 装置。其安装要求: 不得用调长器补偿安装引起的横 向偏差; 要按照流体方向安装; 拉杆起调长作用, 安 装后不得拆卸, 两端螺母需重新紧固。 于 2006 年 11 月 29 日发布, 2007 年