飞机机轮履历本(中英文).docVIP

特 殊 说 明 SPECIAL SPECIFICATION 1. 安装机轮前，应除去轴承上的油封油脂，用纯净汽油清洗干净，干燥后再涂上7014润滑脂。 The seal grease on the bearing should be removed before installing the wheel. Clean the bearing with pure gasoline and dry it, and then coat it with grease 7014. 2. 机轮的定期维护结合更换轮胎或同飞机的定期维护合并进行，检查内容按随机配套的LS170-WSM《LS-170盘式刹车机轮使用维护说明书》进行。 The periodic inspection of wheel should be carried out during replacing tire or periodic inspection of aircraft. The inspection should be carried out per the Operation and Maintenance Manual for LS-170 Disc Brake Wheel (LS170-WSM) provided. 3. 轴承轴向间隙超过0.18mm~0.25mm范围或更换新轴承后，应用LS170-G