无线识别装置设计.docxVIP

  • 0
  • 0
  • 约3.91千字
  • 约 8页
  • 2019-11-06 发布于广东
  • 举报
本设计是基丁?耦合线圈的无线识别装置。系统由阅读器与应答器两部分组 成:阅读器由PT2272.耦合线圈、发光二极管等组成;应答器由SC2262.耦合 线圈、拨码开关等组成。阅读器采用单电源供电,应答器能量全部来自耦合线圈, 无线数据传输采用串口异步通信与ASK调制等方法实现。阅读器能够识别靠近的 应答器并显示识别结杲,显示止确率280%,响应时间W5S,识别距离D25cni。 Abstract This design is based on SCMs wireless identification devices. Td entification System have two components the Reader machine and the Re sponsor card: the Reader machine is made up of PT2272, coupling coil, buzzer and composition; Responser card is made up of SC2262, couplin g coil, switch for code. The system make use of many wireless communi cation tcchnologics such as the Reader machine single pow

文档评论(0)

1亿VIP精品文档

相关文档