《电解质清理机自动控制系统设计》-毕业设计（论文）.docxVIP

大学毕业设计 毕业设计(论文) 题 目 电解质清理机自动控制系统 学生姓名 学 号 专业班级 指导教师 学 院 答辩日期 PAGE IV 摘要 电解质清理机是电解铝工业生产线中阳极组装车间的自动化设备，属于。特殊环境下特种机器。其核心技术长期为国外垄断。本文根据电解质清理机的特点，提出了一种模拟人工清理的单炭块电解质清理机设计方案，阐述了电解质清理机的现状，在论证同类机器的构型基础上，对电解质清理机有了新的认识，通过对控制系统主电路、控制电路设计和参数计算，给出了控制系统完整的控制电气原理图和流程图。根据阳极组装的生产工艺的要求，设计并使用STEP 7编制了一套适用于该组装工艺的PLC 控制程序。本设计过程中涉及较多的开关量输入输出点，故选用配置灵活的模块式结构PLC以提高系统的可靠性与处理效率。本设计对电解质清理机的控制分为自动和手动两个过程，其中移动电机的速度用变频器进行控制。 在控制方案中，PLC选择西门子的S7-200系列的可编程控制器，CPU主机选用CPU226。对相应的控制过程进行编程，并在仿真软件上进行仿真。 关键字:PLC；电解质清理机；变频器；CPU-226;EM235; Abstract Electrolyte cleaning machine industrial production line of aluminum anode assembly plant automation equipment, are. The special circumstances of the special machines. Its core technology for long-term foreign monopoly. According to the characteristics of the electrolyte cleaning machine, a manual clean-up of a simulation of a single charcoal electrolyte cleaning machine design on the status of the electrolyte cleaning machine, the configuration on the basis of the argument similar machine, the electrolyte cleaning machine has a new understanding, through the control system the main circuit, control circuit design and parameter calculation are given complete control system for control of electrical schematics and flowcharts. According to the requirements of the anode assembly of the production process, the design and prepared a PLC control software in the assembly process with STEP 7. Involved in the design process more switch input and output points, so selection of the configuration of a flexible, modular structure PLC in order to improve system reliability and processing efficiency. The design of the electrolyte cleaning machine, automatic and manual control is divided into two control processes, which move the speed of the motor drive control. In the control program, select the PLC Siemens S7-200 series programmable controller, CPU and host selection of the CPU226. Programmin