沙菲双花洒淋浴柱不含浴缸出水嘴SAPPHIREDUALSHOWER.pdfVIP

沙菲双花洒淋浴柱 不含浴缸出水嘴 SAPPHIRE DUAL SHOWER COLUMN WITHOUT BATH SPOUT 97131T-M-CP 使用合适的螺纹密封膏，安装两个接头到冷热供水管。 保持两个接头的中心到中心的距离为150mm，并调整 到同一水平。把装饰罩旋入接头，紧贴墙面。 150mm 2,HOW TO INSTALL THE COLUMN 2,如何安装淋浴杆 On the basis of the centers of the offset connectors, 以接头中心为基准,距离两弯头806mm (仅供参考, measure 806mm (only for reference, please measure 以装好的龙头阀体、换向阀、淋浴管、调整座的实 the distance according to the actual dimension of the 际尺寸为准)的中间位置作一标记。 installed faucet, diverter, slide bar and adjustable 以标记为墙座的圆心基点，以墙座上的螺钉孔 base) from the middle of the two connectors and 为基准在墙上钻一个孔，并打入膨胀管，用螺钉将 make a mark. 墙座锁紧于墙上，在调节套上套入装饰盖并按紧。 With the mark as the center of the fixing bracket, drill one hole according to the mounting holes in the fixing bracket. Insert the raw l plugs into holes. Tighten the fixing bracket with the screws. Fix the cap to the fixing base. m m 6 0 8 Insert the installed slide bar into the nut 将装好的直杆插入龙头的锁紧螺母中，并将锁紧 螺母锁紧。 of the faucet and tighten the nut. Washer