33 WI-BTS-MCCCH功能开启流程.docVIP

DOCPROPERTY Information DOCPROPERTY SecurityClass Ericsson Internal DOCPROPERTY DocName \PAGE arab2 (\NUMPAGES 23) Prepared (also subject responsible if other) No. DOCPROPERTY Prepared BNES NRO MC SA Team DOCPROPERTY DocNo RNEA-17:000305 Uen Approved Checked Date Rev Reference DOCPROPERTY ApprovedBy RNEACAV [Shanjun Wang] DOCPROPERTY Checked DOCPROPERTY Date 2017-01-12 DOCPROPERTY Revision A DOCPROPERTY Reference MCCCH Solution description 1 AIR INTERFACE 空中接口 2 Multiple CCCH Feature Description MCCCH特性描述 3 MCCCH及位置区规划 4 Multiple CCCH Feature Solutions MCCCH解决方案 5 SOFTWARE REQUEST 软件版本要求 6 New Counters 新增加的计数器 7 MCCCH Feature Implementation Procedure on BSC BSC侧MCCCH实施步骤 8 MCCCH Feature Implementation Procedure on BTS BTS侧MCCCH实施步骤 9 MCCCH Feature Implementation DT 10 Cell Log 11 APPENDIX 1 AIR INTERFACE 1.1 CHANNEL CONCEPT The carrier separation is 200kHz, this provides 124 carriers in the GSM 900 band, 374 carriers in the GSM 1800 band and 299 in the GSM 1900 band. Since each carrier is shared by eight MSs, the total number of channels are: · 124 x 8 = 992 channels in GSM 900 · 374 x 8 = 2992 channels in GSM 1800 · 299 x 8 = 2392 channels in GSM 1900 Each of these channels, that is one time slot on a TIME DIVISION MULTIPLE ACCESS (TDMA) frame, is called a physical channel. A variety of information is transmitted between the BTS and the MS. There are different types of logical channels depending on the type of information being transmitted. Each logical channel is used for a specific purpose, e.g. paging, call setup or speech. These logical channels are mapped onto the physical channels, for example, speech is sent on the logical channel TRAFFIC CHANNEL (TCH) and during transmission this is allocated to a certain physical channel, say TIME SLOT 6 (TS6) on a TDMA frame. 1.2 BURSTS AND FRAMES The information contained in one time slot on the TDMA frame is called a burst. There are five different types of bursts: · Norma