负荷开关说明书.pdfVIP

产 品 操 作 说 明 书 Operating Instruction 河南科达电气有限公司 Henan Keda Electrical Co. Ltd KFW-630 柱上式 SF6 智能负荷开关 KFW-630A Pole mounted SF6 intelligent load break switch 1. 概述 1. Overview KFW-630A 型柱上安装的负荷开关适合用于额定电压 12/24/40.5kV,额定电流630A、 50/60Hz 配电网开断、关合电力系统中的负荷电流、过载电流，能够自动将发生故障的 配电线路区段隔离开。开关带有最新技术的电子控制器，可以手动操作、电动操作和远 距离操作。电子控制器装在不锈钢箱体内，能够适合各种气候条件下使用。此外，箱体 内还可安装了有线和无线调制解调器，可以实现远距离监视和控制。简单的柱上安装布 置方便、快速，降低施工成本。 KFW-630A pole mounted load break switch is used for breaking rated voltage 12/24/40.5kV, rated current 630A、50/60Hz power distribution system, closing load current and over load current of power system, it could separate automatically track sections of power distribution which faults occur. The switch is matched with electronic controller which is with the latest technology. The switch has manual, motor, remote operation modes. The electronic controller would be installed inside the stainless steel box, so it could be used in various climate conditions. Besides that, the wire/wireless modem installed inside control box could achieve remote monitoring and controlling. It’s easy and convenient for installation the switch on pole, and that could reduce the execution cost. 2. 标准使用条件 2. Standard application condition 此 SF6 气体负荷开关适应运行条件： Operation condition as follows: 2.1 环境温度 2.1 Ambient temperature 2.1.1 周围空气温度：上限＋50℃，下限－40 ℃。 2.1.1 Air temperature: max: +50 ℃，min. －40 ℃。 2.1.2 相对湿度：110% 2.1.2 Relative humidity: 110% 2..2 海拔不超过 3000m 。 2.2 Altitude ≤3000m. 2.3 风压不超过 700pa （相当于风速34m/ ｓ）。 2.3 Wind pressure ≤700pa (equivalent to wind speed 34m/ ｓ) 2.4 震烈度：8 度。 2.4 Seismic intensity: 8 degree 2.5 安装场所：没有火灾、爆炸危险，无化学腐蚀及经常性剧烈震动。 2.5 Installation site: No fire disaster