《无纬带在电机绑扎中的应用研究》-毕业论文（设计）.docVIP

无纬带在电机绑扎中的应用研究 PAGE III 摘 要 无纬带是电机产品中必不可少的一种固定材料，电机中许多部位均需无纬带绑扎固定，如交直流电机转子端部线圈和转子铁芯槽部绑绑扎；汽轮发电机定子端箍缠绕；换向器3°面封口绑扎等都要用无纬带绑扎。而在直流电机的电枢端部的绑扎材料的选择中，无纬带相比钢丝绑扎，除了节省了大量合金钢材，还在其他许多方面有明显的优势。同时，无纬带还广泛应用于电枢绕组的固定、变压器铁心绑扎等诸多方面。本文对无纬带在电机中的应用研究，并通过对无纬带特性的了解；无纬带预紧拉力的定量测量；不同无纬带厚度绑扎工艺对比；无纬带厚度与层数关系的研究，详细了解无纬带的绑扎工艺，并且以求对其有一个较新的认识。 关键词：无纬带，绑扎工艺，预紧力 ABSTRACT Banding tape with the electrical products essential to a fixed material, many parts of motor required no latitude with lashing, such as AC and DC motor rotor and the rotor core end of the coil grooves lashing hoop; Statorside hoop winding; commutator surface sealing bandage 3 ° latitude bands are all free to use Binding.The armature in the DC end of the banding material selects the current methods commonly used in industry whether the latitude belt lashing and lashing two non-magnetic wire. The fastening material as a motor, no latitude belt steel banding. In addition to save a large number of alloy steel, also have many other significant advantages.At the same time, no latitude with the armature winding is also widely used in fixed, lashing, and many other aspects of transformer core. In this paper, with no latitude in the application of the motor, and through understanding of characteristics of non-latitudes; no latitude are the quantitative measurement of preload tension while different thickness banding technique is no latitude comparison. No latitude with the relationship between the thickness and layersresearch to learn more about the banding process , and in order to have a relatively new to their understanding. Key words: banding tape, banding techniques, preload 目 录 TOC \o 1-2 \h \u 1 绪论 1 1.1无纬带的发展历史及应用现状 1 1.2研究的目的和意义 1 1.3本文的研究内容 2 2 无纬带绑扎工艺研究 3 2.1“束达”绑扎张力装置的介绍 3 2.2上海电机厂有限公司的无纬带绑扎工艺 4 2.3电枢绕组的绑扎工艺 8 2.4直流电机的转子绑扎新工艺研究 10 3无纬带绑扎强度计算 12 3.1计算无纬带绑扎强度与厚度要求 12 3.2对比计算的结论 14 3.3工业上的无纬带厚度概念的改进 14 4无纬带绑扎预紧力选用 15 4.1无纬带预紧力的概念 15 4.2 绑扎带受力分析 15 4.3船用电机修理中的无纬带箍延伸性能试验 22