HP4高压单座角型调节阀HighPressureSingleSeated.PDF

产 品技术规格 产 品技术规格 ® SPE CIFI CA TI ONS SPE CIFI CA TI ONS HP4 高压单座角型调节阀 High Pressure Single Seated Angle Valves HP4 高压单座角型调节阀采用不平衡型阀芯，阀 HP4 High Pressure Single Seated Angle Valve uses a unbalanced plug with a large guiding area for good 芯导向部分导向面积大，抗振性好。阀内件采用二级 vibration resistance. The trims represent good erosion resistance with secondary pressure–relief structure for 降压结构设计，在高压差时，抗冲刷性好，产品使用 long service life of the valve. It features with compact 寿命较长。该阀结构紧凑，流量大，可调范围广。主 structure, large flow and wide rangeability, and it primarily used for urea synthetic tower outlet and other 要用于尿素合成塔出口及其它高压场合。 high pressure applications. The leakage complies with the ANSI FCI 70-2-2006 调节阀的泄漏量符合ANSI FCI 70-2-20 13 标准。 standards. The compact size and large output force can be 调节阀配用多弹簧薄膜或汽缸执行机构，其结构紧凑， available when the control valve is combined with muLFi-spring diaphragm actuator or cylinder actuator 输出力大。 This product complies with the GB/T4213-2008 产品符合GB/T4213-2008 标准。 standards. 标准规格 STANDARD SPECIFICATION 阀体 BODY 形 式 Type 角型锻造阀 Forging angle valve 公称通径 10、15、25