Excel交换机总体介绍资料新.pptVIP

Signal Detect LED = Red indicates a problem such as a damaged or incorrectly connected fiber optic cable or an EXNET Controller Card that is not properly seated in the slot EXNET I/O Card LED indicators should show: 1. Signal Detect = Off (Signal is detected) 2. Fault Detect = Off (No fault detected) Signal Detect LED = Red indicates a problem such as a damaged or incorrectly connected fiber optic cable or an EXNET Controller Card that is not properly seated in the slot EXNET I/O Card LED indicators should show: 1. Signal Detect = Off (Signal i