MIL-DTL-21649D-2017 国外国际标准.pdf

INCH-POUND MIL-DTL-21649D(SH) 28 March 2017 SUPERSEDING MIL-M-21649C(SH) 27 April 1983 DETAIL SPECIFICATION MOUNT, RESILIENT, TYPE 5M10,000-H This specification is approved for use by the Naval Sea Systems Command and is available for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification covers the Type 5M10,000-H resilient mount assembly consisting of the following three elements: a compression component, a shear component, and a snubber component. The mount assembly has an assigned load capacity of 5,000 to 10,000 pounds and supports loads only in its axial direction (see 6.4.1). 2. APPLICABLE DOCUMENTS 2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3 and 4 of this specification, whether or not they are listed. 2.2 Government documents. 2.2.1 Specifications, standards, and