蜂窝小区同频干扰的Matlab仿真.docVIP

. ..页脚. Lab4: Write a program to calculate the signal interference ratio (SIR) in the forward link, and repeats it by randomly changing the position of the MS. After a number of simulations, use the simulated results to draw the histogram of the SIR (S=I). Try to obtain histograms with different path loss exponent n and cluster size N. Conclude your results. The co-channel interference in the forward link can be characterized in figure 1. A MS will be interfered by the co-channel base station. In our simulation, we consider the 18 co-channel cell, including 6 cells in the first loop and 12 cells in the second, no matter what the cluster size N is. Figure 1 forward link co-channel interference Firstly, we should randomly choose the position of the MS in the cell. Since the cell is hexagon which is hard to handle we cut and paste it into a square. As we can see in figure 2, the center of the coordination is the center of the cell. The square we choose is ABCD. We then randomly choose a pair of x and y as the coordinate of MS. If MS locates in triangle 1 we cut and paste it to triangle 3 and if it locates in triangle 2 we move it to triangle 4. We assume the range of the base station is 0.1 as radius of cluster is 1. For the MS who located within this area, we change its distance to be 0.1 as it is too close to the base staion. Figure 2 randomly choose the position of MS in a cell Matlab code: RandPOS.m function [z] = RandPOS(m) %******** get random value of x,y within a square *****% x = 1.5*rand(m,1)-1; y = sqrt(3)*rand(m,1)-0.5*sqrt(3); %******** use for loop to cut the square into a hexagon *****% for k=1:m if x(k)-1 x(k)-0.5 y(k)(1+x(k))*sqrt(3) x(k)=x(k)+1.5; y(k)=y(k)-sqrt(3)/2; elseif x(k)-1 x(k)-0.5 y(k)-(1+x(k))*sqrt(3) x(k)=x(k)+1.5; y(k)=y(k)+sqrt(3)/2; end %******** if the MS is too nearly to the base station ******% if sqrt(x(k)^2+y(k)^2)0.1