哈沃包装机技术说明.docVIP

. Word 文档 Technical Conditions技术条款 product: 物料 Ordinary Cement 水泥 bulk density: 物料容重： 0.9 – 1.1 kg/dm3 (fluidized) 0.9 – 1.1 kg/dm3（流性） fineness: 粒度： max. 4200 cm2/g (Blaine) 最大布氏粒度4200 cm2/g temperature: 物料温度： 80° C max. 最高温度80° C moisture: 物料湿度： 0.5% H2O max. 最大含水率0,5% voltage: 电压 400 V, +/- 5% frequency: 频率： 50 cps, +/- 2% system configuration: 系统设置： TN control voltage: 控制电压： 220 VAC control voltage: 控制电压： 24 V DC insulation class: 绝缘等级： F type of protection: 保护等级： IP54 installation above main sea level: 安装海拔： 1000m Required ambient temperature: 设备工作环境温度： max. +45 °C min. +5 °C machine type: 设备形式： HAVER-ROTO-Packer Type 8 RSC HAVER回转包装机，型号：8 RSC net machine output: 设备产能 Each max. 2,400 bags/h each 50 kg 50千克包装袋，单台最大产量2,400袋/小时 bag weights包装袋规格： 50 kg kind of bag: 包装袋形式 Sewn Woven PP valve bags. At least 100 sample bags are needed for the test before it is confirmed that the bag is suitable for the automatic bag placer. 缝线编制阀口袋 至少需要100条样袋来测试包装袋是否适合用于自动插袋机。 Sample bag(s):样袋 To be provided. 有待提供 empty bag dimensions: 包装袋尺寸： still have to be indicated 有待说明 width of bag valve: 阀口尺寸 still have to be indicated 有待说明 height of filling tube: 灌包咀高度： 1,200 mm weight accuracy +-150g deviation as average of 10 consecutive bags per spout, with sufficient bag size, continuous packing operation and relatively constant bulk density process 包装精度： 如果所用包装袋尺寸合适，包装进程无间断并且物料容重恒定，同一灌包咀连续包装10袋的平均误差为正负150克。 total compressed-air required: Detailed by the consumption list with a gauge pressure of 6 bar quality as per ISO 8573.1 particle size: 5my concentration: 5mg/m3 pressure dew point: + 2° C minimum - 20° C maximum residual oil quantity: 25mg/m3 maximum 压缩空气需求量： 详见能耗表 压力6巴，质量标准ISO8573.1 杂质粒径：5微米 杂质密度：5毫克/立方米空气 露点：+ 2° C时最小 -20° C时最大 残留油量： 最大密度25mg/m3 total dedusting air required: 总收尘空气需求量： Detailed by the consumption list详见能耗表 air volumes and pressure at: 1 bar 20° C 空气量及压力 pressure data refer to differential pressures 压力1巴，温度20° C时的压力数据根据不同的压力而定 c