c1180-96中文版-砌块用灰浆和薄浆的标准术语.docVIP

C 1180 PAGE 777 Designation: C 1180–96编号：C 1180–96 PAGE 776 Standard Terminology ofMortar and Grout for Unit Masonry1砌块用灰浆和薄浆的标准术语 This terminology is under the jurisdiction of ASTM Committee C-12 on Mortars for Unit Masonry and is the direct responsibility of Subcommittee C12.08 on Terminology.本试验方法受ASTM委员会C-12砌块用灰浆委员会管辖，并且由C12.08术语分委会直接负责。Current edition approved June 10, 1996. Published August 1996. Originally published as C 1180 - 91. Last previous edition C 1180 - 95.现行版本于1996年6月10日批准，并于1996年8月出版。最初版本编号为C1180-91，上一版本编号为C1180-95。 This standard is issued under the fixed designation C I ISO; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C1180刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 1. Scope适用范围 1.1 This terminology contains terms, definitions of terms, descriptions of terms, nomenclature, and explanations of abbreviations, acronyms, and symbols specifically associated with standards under the jurisdiction of ASTM Committee C-12 on Mortars for Unit Masonry.本术语集包含术语、术语定义、术语描述、专用名称、和缩写解释、缩写词和与受ASTM委员会C-12砌块用灰浆委员会管辖的标准特别相关的符号。 1.2 The definitions and descriptions of terms in this terminology pertain to Test Methods C 780, C 952, C 1019, and C 1148 and Specifications C 144, C 270, C 404, C 476, C 887, and C 1142.本术语里的术语定义和描述涉及试验方法C780、C952、C1019、C1148和规范C144、C270、C404、C476、规格C887、规范C1142。 2. Referenced Documents参考文件 2.1 ASTM Standards:ASTM标准： C 144 Specification for Aggregate for Masonry Mortar2 C144砖石建筑用灰浆骨料规范 Annual Book of ASTM Standards, Vol 04.05.ASTM标准年鉴第04.05卷。 C 270 Specification for Mortar for Unit Masonry2C270砌块用灰浆规范 C 404 Specification for Aggregates for Masonry Grout2C404砖石建筑用薄浆骨料规范 C 476 Specification for Grout for Masonry2C476砖石建筑用