c652-97中文版-空心砖（用粘土或页岩制成的空心砌块）标准规范.docVIP

C 652 PAGE 402 Designation: C 652 – 97编号：C 652 – 97 PAGE 392 Standard Specification forHollow Brick (Hollow Masonry Units Made From Clay or Shale) This specification is under the jurisdiction of ASTM Committee C-15 on Manufactured Masonry Units and is the direct responsibility of Subcommittee C15.02 on Clay Brick and Structural Clay Tile.本规范由ASTM This specification is under the jurisdiction of ASTM Committee C-15 on Manufactured Masonry Units and is the direct responsibility of Subcommittee C15.02 on Clay Brick and Structural Clay Tile.本规范由ASTM委员会C-15人造砌筑块委员会管辖，并由C15.02粘土砖及粘土空心砖分委会直接负责。Current edition approved Jan. 10, 1997. Published March 1997. Originally published as C 652 - 70. Last previous edition C 652 - 95a.现行版本于1997年1月10日批准，并于1997年3月出版。最初版本编号为C652-70，上一版本编号为C 652-95a。 This standard is issued under the fixed designation C 652; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C 652刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 This standard has been approved for use by agencies of the Department of Defense. Consult the DoD Index of Specifications and Standards for the specific year of issue which has been adopted by the Department of Defense.本标准已获得批准供（美国）国防部各部门使用。对于（美国）国防部采用的具体刊发年份，请查阅（美国）国防部规范与标准索引。 1. Scope 适用范围 This specification covers hollow building brick and hollow facing brick made from clay, shale, fire clay, or mixtures thereof, and fired to incipient fusion. Four types of hollow brick in each of two grades and two classes are covered. In this specification the term hollow brick shall be understood to mean hollow clay masonry units whose net cross-sectional area (solid area) in any plane parallel to the surface, containing the cores, cells, or de