c534-99中文版-片状和管状预制韧性弹性的蜂窝状绝热材料.docVIP

C 534 PAGE 206 Designation: C 534 - 99编号：C 534 - 99 PAGE 196 Standard Specification forPreformed Flexible Elastomeric Cellular Thermal Insulationin Sheet and Tubular Form This specification is under the jurisdiction of ASTM Committee C-16 on Thermal Insulation and is the direct responsibility of Subcommittee C16.22 on Organic and Nonhomogeneous Inorganic Thermal Insulation.Current edition approved March 10, 1999. Published May 1999. Originally This specification is under the jurisdiction of ASTM Committee C-16 on Thermal Insulation and is the direct responsibility of Subcommittee C16.22 on Organic and Nonhomogeneous Inorganic Thermal Insulation.Current edition approved March 10, 1999. Published May 1999. Originally published as C 534 - 64T. Last previous edition C 534 - 94.本规范由ASTM委员会C-16隔热材料委员会管辖，并由C16.22有机和非均质无机绝热材料分委会直接负责。现行版本于1999年3月10日批准，并于1999年5月出版。最初版本为C534-64T。上一版本为C534-94。 This standard is issued under the fixed designation C 534; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C534刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标（ε）表示自上一修订版或重新批准后的编辑性修改. 1. Scope适用范围 This specification covers preformed flexible elastomeric cellular thermal insulation in sheet and tubular form. This specification covers materials to be used on commercial or industrial systems with operating temperatures from -57 to 104℃ (-70 to 220°F).本规范包括片状和管状预制韧性弹性的蜂窝状绝热材料。本规范包括在操作温度范围为-57℃-104℃（-70°F The values stated in SI units are to be regarded as the standard. The inch-pound equivalents of SI units, given in parentheses, may be approximate.采用国际单位制表示的数值视为标准值。括号内给出的国际单位制的英制单位视为近似值。 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibil