ANSYS平面问题实例.pptVIP

;ANSYS求解平面问题实例;悬臂梁中部（x=l);1、分析类型;Start Programs ANSYS 9.0ANSYS Product Laucher;ANSYS Main Menu: Preferences →select Structural → OK;ANSYS Main Menu: Preprocessor →Modeling →Create →Keypoints →In Active CS →依次输入4个点的坐标：input:1(635,0)→Apply → 2(1905,0)→Apply → 3(635,-76.2) →Apply → 4(1905,-228.6) →OK;ANSYS Main Menu: Preprocessor →Modeling →Create →Areas →Arbitrary →Through KPs →依次拾取4个点→OK;3、划分网格;3、划分网格;3、划分网格;3、划分网格;3、划分网格;3、划分网格;3、划分网格;3、划分网格;3、划分网格;4、求解;19;20;4、求解;ANSYS Main Menu: Solution →Solve →Current LS →OK(to close the solve Current Load Step window) →OK;ANSYS Main Menu: General Postp