NBC-250焊机电路原理分析及故障处理讲课稿.docVIP

NBC-250焊机电路原理分析及故障处理 河南机电高等专科学校 毕 业 论 文 论文题目：NBC-250焊机电路原理分析及故障处理 系 部 材 料 工 程 系 专 业 焊接技术及自动化 班 级 焊 接 043 学生姓名 学 号 0433323 指导教师 李 兴 霞 2007年 5 月 22 日 摘要： 本课题为NBC-250焊机电路原理分析与故障处理的设计。NBC-250焊机主要由焊接电源、控制装置、送丝机、焊枪及供气系统等组成，其中焊接电源是核心部分，其设计参数的合理与否对整机的性能影响较大。 NBC-250焊机的焊接电源由主电路和控制电路两大部分组成。其中主电路由带有特殊抽头的变压器、三相桥式整流器、电压调节器和电源输出电抗器组成。控制电路由控制变压器、时序控制电路和带电枢电压负反馈的送丝机控制电路组成。另外，本文通过对NBC-250焊机常见故障进行了分析，并对产生故障的原因进行了分析处理，简述了焊机故障检修的简单程序与注意事项。 关键词：NBC-250焊机；三相桥式整流器； 故障处理 Abstract The graduation project is to studies the knowledge a comprehensive utilization, can deepen us to the elementary knowledge understanding will build the good foundation for the later work. This topic is the NBC-250 welding machine circuitry analysis and the breakdown processing design. Through has carried on the analysis to the NBC-250 welding machine common breakdown, and the pair process breakdown reason has carried on analysis processing, has summarized the welding machine trouble shooting simple procedure and the matters needing attention. The NBC-250 welding machine welding power source two major parts is composed by the main circuit and the control circuit. Main circuit by has the special tap the transformer, the three-phase bridge type rectifier, the voltage regulator and the power source output reactor is composed. The control circuit by controls the transformer, the sequential control electric circuit and the belt armature negative voltage feedback delivers the silk machine control circuit to be composed. NBC-250 pulls out the hairstyle welding machine realizes one of this kind of welding method welding apparatuses. It is by the diode took the rectifier cell, using CO2 took the controlled atmosphere, sends in through the special-purpose welding torch the gas the welding area the CO2 gas removes the welding area the air, and the cover on the liquid metal molten bath, the realization protective function, avoid