频闪标准简介.pdfVIP

频闪标准参数介绍 频闪标准参数 1 基本测量（BASIC） 2 2 IEEE Std 1789 3 3 IEC-Pst 4 4 CA C EC 4 5 ASSIST 5 6 CIE SVM 7 第 1 页(共 7页) 1、基本测量（BASIC） 频率:此处的频率指待测照明产品光输出频率。 Frequency here is the frequency of light output of a tested lighting product. 闪烁指数（Flicker Index ）：（参考 ：IESNA 2000 ） 闪烁指数表示为照明产品光输出的一个周期内，光输出平均 等级以上的面积除以光输 出光波形的总面积，即 Area FI = 1 Area + Area 1 2 。 Flicker Index is defined as the area between the curve representing the waveform and the average light level divided by the total area below the curve for a single cycle of the fluctuation. 闪烁百分比(Percent Flicker)和调制深度（Modulation Depth ） 定义相同：（参考：CIE TN 006 ：2016 and IEEE Std 1789:2015 ） 闪烁百分比（或调制深度）指在光输出波形的一个周期内， 最大光输出等级与最小光输出等级之差与最大光输出等级与最 小光输出等级之和的之比（乘以100% ）,即 Max - Min A - B PF = = 。 Max + Min A + B Percent Flicker or modulation depth is defined as the difference between maximum and minimum light level divided by the sum of maximum and minimum light level(multiplied by 100%). 第 2 页(共 7页) 2、IEEE Std 1789 (参考：IEEE Std 1789-2015 ：IEEE Recommended Practices for Modulating Current in High-Brightness LEDs for Mitigating Health Risks to Viewers) NM 是归一化调制normalized modulation 的缩写，用于评价 频闪的风险等级。 NM is the abbreviation of normalized modulation,and is used to evaluate the risk