轴孔接触应力分布分析.pdfVIP

Composite Structures 86 (2008) 308–313 Contents lists available at ScienceDirect Composite Structures journal homepage: www.elsevi /locate/compstruct Analysis of stress distribution around pin loaded holes in orthotropic plates O. Aluko a, H.A. Whitworth b,* a Department of Mechanical Engineering and Engineering Mechanics, Michigan Technological University, Houghton, MI 49931, United States b Department of Mechanical Engineering, College of Engineering, Architecture and Computer Sciences, Howard University, Washington, DC 20059, United States a r t i c l e i n f o a b s t r a c t Article history: An analysis was performed to evaluate the stress distribution in composite pin loaded joints. The analysis Available online 7 June 2008 involves specification of displacement expressions in the form of a trigonometric series that satisfy the boundary conditions for the contact region in terms of a set of undetermined coefficients. Based on this Keywords: assumed distribution, the Lekhnitskii complex variable approach is used to obtain the stress functions Composite materials needed to evaluate the contact stresses within the joint. Unknown coefficients in the displacement Pinned joints expression were obtained by assuming coulomb friction within the contact region and evaluating the dis- Fiber reinforced laminates placement at discrete points within this region. Material properties of c