毕业设计（论文）-斜连杆数控加工工艺与钻8孔夹具设计.doc

摘要 摘要 PAGE 12 PAGE 12 毕 业 设 计 (论 文) 斜连杆数控加工工艺与钻8孔夹具设计 系 名： （四号宋体） 专业班级： （四号宋体） 学生姓名： （四号宋体） 学 号： （四号宋体） 指导教师姓名： （四号宋体） 指导教师职称： （四号宋体） 年 月 PAGE II 摘要 题目是基于斜连杆零件的加工工艺规程及钻孔工序的专用夹具设计。斜连杆零件的主要加工表面是端面及孔系。往往，表面精密加工精度优于确保简单孔的寿命。孔后的设计遵循所述第一表面的原理。一般来说，表面精密加工精度优于确保简单孔的寿命。孔后的设计遵循所述第一表面的原理。与孔加工平面，在粗加工明确的划分和整理阶段，以确保精确孔。与孔加工平面，在下一步骤中，除了在单个进程的顶面和定位孔技术和在平面其他孔的外面。支持孔加工系统采用坐标镗床。整个过程通常由。使用专用夹具夹具，夹多用气动夹紧，夹持，需要可靠的，自锁不了，大批量，因此更高的生产率，在加工生产线，以满足设计。 关键词:斜连杆；加工工艺；工序；专用夹具 全套图 纸加扣 3346389411或3012250582 PAGE III Abstract Topic is dedicated fixture design oblique connecting rod parts process planning and drilling processes based. The main parts of the machined surface is oblique rod end surfaces and holes. Often, the surface precision machining accuracy to ensure better life simple hole. After the hole designed to follow the principles of the first surface. In general, the surface precision machining accuracy to ensure better life simple hole. After the hole designed to follow the principles of the first surface. And hole machining plane, a clear division in roughing and finishing stages, to ensure accurate holes. And hole machining plane, in the next step, in addition to the top surface and the positioning hole technology in a single process and out of the plane of the other holes. Support hole processing system uses the coordinate boring machine. The whole process usually made. Use special fixture clamp, multi-use pneumatic clamping, gripping, the need for reliable, self-locking can not, in large quantities, and therefore higher productivity in the production line to meet the design. Use special jig fixtures, clamping multi-use manual clamping, gripping, reliable, self-locking mechanism may not have to. Therefore, higher production efficiency. Suitable for high-volume, assembly line processing. Able to meet the design requirements. Keywords: five-hole block; processing; step; spe