精美品PPT模板（汇总）.pptxVIP

单击此处添加标题文字作品名称添加文字内容地址 作者：A、B、C2.内容展示1.设计简介3.分段滚扎原理 4.有限元分析内容1设计简介1.主要思路 本设计是在ZA28-20滚丝机的基础上，针对细长轴工件（L=2200mm,Φ=28mm)分段钻石纹的特点，设计专用机构完成分段推进滚轧的目的。该滚丝机包括机身、传动机构、液压与润滑机构、分段推进机构等。其中，分段推进机构包括伺服电机、同步带、扭矩限制器、旋转编码器、PLC、触摸屏、气爪、直线导轨、滚珠丝杠等零部件。sunshinesunshinesunshinesunshine“1st Add your wordssunshine without shadeall pleasure without pain, is not life at all. Take the lot of the happiest - it is a tangled yarn. pleasure without pain, is not life at all. Take the lot of the happiest - it is a tangled yarn. sunshine without shadeall pleasure without pain, is not life at all. Take the lot of the happiest - it is a tangled yarn. pleasure without pain, is not life at all. Take the lot of the happiest - it is a tangled yarn. sunshine without shadeall pleasure without pain, is not life at all. Take the lot of the happiest - it is a tangled yarn. pleasure without pain, is not life at all. Take the lot of the happiest - it is a tangled yarn. ”2内容演示“2.内容展示 整机装配、主传动系统、分段推进滚轧机构、分段推进滚轧机构动态仿真视频、部分部件爆炸图、部分零部件工程图等部分组成。 传动系统动作视频分段推进动作视频QSZ-193钻石纹分段推进滚丝机的加工视频2.内容展示59%59%59%59%123,456123,456123,456123,456RevenueRevenueRevenueRevenueBut all sunshine without shade, all pleasure withoutBut all sunshine without shade, all pleasure withoutBut all sunshine without shade, all pleasure withoutBut all sunshine without shade, all pleasure without“2nd Add your words“3分段滚扎原理工作原理气爪PLC旋转编码器伺服电机同步带扭矩限制器滚珠丝杠副直线导轨1）旋转编码器检测滚珠丝杠的角位移，从而得知工件进给的位置； 旋转编码器发讯，PLC接讯将信号发送给伺服电机，完成反馈。同时，PLC控制气爪启闭。托架2）滚轮带动工件的轴向速度v1，托架带动工件的轴线速度v2，通常v1≠v2。扭矩限制器能够使滚珠丝杠空转（打滑），从而将速度v2与v1保持一致，因此该分段推进机构具有较高的位置精度。工件进给和退回3.分段滚扎原理SEO ANALYSISHEADING FOR THIS TEXTSBut all sunshine without shade, all pleasure without pain, is not life at all. Take the lot of the happiest - it is a tangled yarn. Bereavements and blessings, one following another, make us sad and blessed by turns. pleasure without pain, is not life at all. Take the lot of the happiest - it is a tangled yarn. Bereavements and blessings, one following another, make us following another, m