欧洲经委会（ECE）汽车标准法规： R12-03S-3S-C2.pdfVIP

E/ECE/324 E/ECE/TRANS/505 } Add.11/Rev.3/Corr.2 3 May 2010 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF THESE PRESCRIPTIONS ∗∗/ ∗∗ (Revision 2, including the amendments which entered into force on 16 October 1995) _________ Addendum 11: Regulation No. 12 Revision 3 - Corrigendum 2 Corrigendum 2 to Revision 3, subject of Depositary Notification C.N.539.2009.TREATIES-1 dated 17 September 2009 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF VEHICLES WITH REGARD TO THE PROTECTION OF THE DRIVER AGAINST THE STEERING MECHANISM IN THE EVENT OF IMPACT _________ UNITED NATIONS ∗/ Former title of the Agreement: Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition of Approval for Motor Vehicle Equipment and Parts, done at Geneva on 20 March 1958. GE.10- E/ECE/324 E/ECE/TRANS/505 } Add.11/Rev.3/Corr.2 Regulation No.12 page 2 Annex 3 , Paragraph 2.2., amend to read: 2.2. Barrier The barrier shall consist of a block of reinforced concrete not less than 3 m wide in front and not less than 1.5 m high. The barrier shall be of such thickness that it weighs at least 70 metric