Atmel-42155-SAM4S-应用手册电原理图_AT03463.pdfVIP

APPLICATION NOTE AT03463: SAM4S Schematic Checklist Atmel 32-bit Microcontrollers Introduction A good hardware design comes from a proper schematic. Since the Atmel® SAM4S microcontrollers have a fair number of pins and functions, the schematic for these devices can be large and quite complex. This application note describes a common checklist, which should be used when starting and reviewing the schematics for a SAM4S design. Features  Power circuits  ADC connection  Clock and crystal oscillators  JTAG and SWD debug ports  USB connection  Boot Program constraints  Suggested reading Atmel-42155E-SAM4S-Schematic-Checklist_ApplicationNote_AT03463_112015 Table of Contents 1 Schematic Checklist 3 1.1 Single Power Supply Strategy 3 1.2 Dual Power Supply Strategy 5 1.3 Backup Unit Externally Supplied 7 1.4 Clocks, Oscillator, and PLL 9 1.5 Serial Wire and JTAG 10 1.6 Flash Memory 11 1.7 Reset and Test Pins 11 1.8 PIOs 11 1.9 Parallel Capture Mode 11 1.10 Analog Reference 12 1.11 12-bit and 10-bit ADC (3) 12 1.12 12-bit DAC 12 1.13 USB Device (UDP) 12 1.14 Static Memory Controller (SMC) 13 2 SAM4S Boot Program Constraints 14 2.1 SAM-BA Boot 14 3 Suggested Reading 15 3.1 Device Datasheet 15 3.2 Evaluation Kit User Guide 15 3.3 USB S