Indy RS2000硬件用户手册.pdfVIP

Indy® RS2000 Hardware User’s Guide Indy® RS2000 Overview The Impinj® Indy® RS2000 is a surface mount module that comprises a completely integrated reader solution for EPC Gen2 / ISO18000-63 (formerly 18000-6C) applications. The module was developed to make embedding a high performance reader easy. The Indy RS2000 builds on market-leading Indy reader chip technology and integrates all of the necessary components into a small package. Just provide power, UART connection from a host, an antenna, and start reading tags. It is fully tested and is certified for modular operation under FCC and IC regulations. The RS2000 comes in a surface mount package designed to work as a SMT (surface mount technology) component in a standard PCB manufacturing process. This document provides hardware developers technical guidance to ensure optimal performance when using the Indy RS2000. Air Interface RAIN RFID Protocol EPCglobal UHF Class 1 Gen2 / ISO 18000-63 (formerly 18000-6C) Supports dense reader mode (DRM) Tx Output Power Range: +10 to +31.5 dBm (+30 dBm maximum in Japan) Default: +30 dBm Antenna Ports 4 antenna ports total: • 2 connectorized ports • 2 surface mount ports Dimensions 38 mm by 52 mm by 4 mm Package Type 35 pin surface mount package (SMT compatible) Rx Sensitivity -74 dBm (1% packet error rate). Assumes a 15 dB antenna return loss at 31.5 dBm output power. DC Power Supply 3.2 to 5.25 Volts Supported Worldwide regional support. All major regions supported. See the device Regions