基于Labview的输油泵状态监测系统研究说明书.docx

基于LabWIEW的输油泵监测系统研究 PAGE IV 基于LabVIEW的输油泵监测系统研究 摘 要 输油泵机组在长距离输油管道中有着重要作用，实现输油泵的在线监测有重要的现实意义。本文以LabVIEW为工具开发在线输油泵监测系统。通过对输油泵结构及其工作原理的研究，搭建输油泵监测系统硬件结构。通过对输油泵故障机理的研究，利用LabVIEW建立软件系统即时对信号分析处理来实现输油泵在线监测。 本文将在以下几个方面对输油泵状态监测系统做出研究： 1输油泵结构原理研究 ：通过对大型离心式输油泵的结构，工作原理及相关性能参数的分析，分析输油泵常见故障及产生机理。 2监测系统硬件结构研究：以系统总体结构为基础，搭建输油泵监测系统硬件结构，主要为监测系统的选型及对不同种信号的采集硬件 3信号采集与分析：进行信号采集原件的选型如各种传感器，并对采集信号进行时域分析，频域分析，小波分析。 4监测系统软件结构研究：软件结构主要包括数据采集模块，信号处理模块，状态分析与故障诊断模块，信息管理模块，并最终完成软件程序的实现。 关键词：输油泵; LabVIEW ;监测系统 ;小波分析  ABSTRACT The oil pump unit plays an important role in the long distance oil pipeline, and it is of great practical significance to realize the on-line monitoring of the oil pump. This paper uses LabVIEW as a tool to develop an online fuel pump monitoring system. Through the study of the structure and working principle of the oil pump, the hardware structure of the oil pump monitoring system is set up. Through the research on the failure mechanism of the oil pump, the software system is established by LabVIEW to realize the on-line monitoring of the oil pump on the signal analysis and processing. This article will be in the following aspects of the oil pump condition monitoring system to study: 1 The principle of the structure of the oil pump is analyzed by analyzing the structure, working principle and related performance parameters of the large centrifugal oil pump, and analyzes the common faults and generating mechanism of the oil pump. 2 The hardware structure of the monitoring system is based on the overall structure of the system, and the hardware structure of the oil pump monitoring system is set up, mainly for the selection of the monitoring system and the acquisition of different kinds of signals. 3 Signal acquisition and analysis: the original collection of signal acquisition, such as a variety of sensors, and the acquisition signal for time domain analysis, frequency domain analysis, wavelet analysis. 4 Monitoring system software structure research: The software struc