hypermesh网格质量检测1.docVIP

HyperMesh HyperMesh Tutorials Quality Checking and Editing Mesh - HM-3300 1/12 Checking and Editing Mesh - HM-3300 In this tutorial, you will learn how to: ? Identify shell element connectivity problems ? Correct shell element connectivity problems ? Review the model’s shell elements to ensure connectivity problems were corrected ? Remesh the elements along the rib Exercise This exercise uses the model file, cover.hm. Step 1: Retrieve and view the HyperMesh model file. Open the file cover.hmlocated in the installation folder\tutorials\hmdirectory. Step 2: Review the model’s free edges to identify shell element connectivity problems. 1. Access the edges panel in the following ways: ? From the Menu Bar, select Mesh, then select Check, then Components, then Edges ? From the main menu, select the Tool page, and then click edges file:///D:/Program/HyperMesh/help/hm/hm3300.htm 20 HyperMesh HyperMesh Tutorials Quality Checking and Editing Mesh - HM-3300 2/12 ? Press the SHIFT+F3 keys 2. With the comps selector active, click any element in the graphics area. The component containing the element is selected. 3. Click find edges. Red, 1-D elements are displayed. They are organized into the new component named ^edges. A red 1-D element is created along each shell element edge that is free; one or more of the element edge’s nodes is not shared by the adjacent elements. Note: For a component name whose first character is ^, the component and its contents is not written to the input file when the model is exported. 4. Click Shaded Elements and Mesh Lines ( ). 5. Observe the red, 1-D elements (free edges). 6. Try to identify gaps in the continuity of the mesh. Hint: Look closely at free edges interior to the model. 7. In the Model browser, turn the display on and off for the component shells to continue to identify which red, free edges do not belong. 8. Turn on the display for the component, shells. Step 3: Correct the shell element connectivity problems using the edges pan