- 1、本文档被系统程序自动判定探测到侵权嫌疑,本站暂时做下架处理。
- 2、如果您确认为侵权,可联系本站左侧在线QQ客服请求删除。我们会保证在24小时内做出处理,应急电话:400-050-0827。
- 3、此文档由网友上传,因疑似侵权的原因,本站不提供该文档下载,只提供部分内容试读。如果您是出版社/作者,看到后可认领文档,您也可以联系本站进行批量认领。
查看更多
1 AS/NZS 3580.2.2:2009
Australian/New Zealand StandardTM
A
S
/
N
Z
S Methods for sampling and analysis of ambient air
3
5
8
0. Method 2.2: Preparation of reference test
2
.
2
: atmospheres—Compressed gas method
2
0
0
9
PREFACE
This Standard was prepared by the Joint Standards Australia/Standards New Zealand
Committee EV-007, Methods for Examination of Air as an Australian/New Zealand
Standard to supersede AS 3580.2.2—1990. The Standard deals with the preparation of
reference test atmospheres for ambient air analysers utilizing compressed gas Certified
Reference Materials (CRMs).
FOREWORD
The calibration and verification of ambient air analyser response is principally carried out
utilizing a compressed gas CRM and associated dilution apparatus. This has resulted in a
need to standardize the procedures followed and to specify quality assurance requirements.
METHOD
9 1 SCOPE
0
0
2
r This Standard sets out a method for the preparation of reference test atmospheres containing
a
M known concentrations of determinand(s), using a calibration gas dilution method.
8
0
n The method is applicable to components that do not react with each other, the cylinder
o
A
I walls or the dilution gas, and that remain total
您可能关注的文档
- 16cfr1611-2009 国外国际规范.pdf
- 16CFR1615-2009 国外国际规范.pdf
- ANSIEIA364E-2008 国外国际规范.pdf
- APISPEC6D-2008 国外国际规范.pdf
- AS ISO3834-1-2008 国外国际规范.pdf
- AS ISO3834-3-2008 国外国际规范.pdf
- AS ISO3834-4-2008 国外国际规范.pdf
- AS ISO3834-5-2008 国外国际规范.pdf
- AS ISO9798.2-2008 国外国际规范.pdf
- AS ISO9798.4-2008 国外国际规范.pdf
- 《GB/T 22838.3-2025卷烟和滤棒物理性能的测定 第3部分:圆周 非接触光学法》.pdf
- 中国国家标准 GB/T 7410.1-2025搪瓷制品和瓷釉 术语 第1部分:术语和定义.pdf
- 《GB/T 7410.1-2025搪瓷制品和瓷釉 术语 第1部分:术语和定义》.pdf
- GB/T 7410.1-2025搪瓷制品和瓷釉 术语 第1部分:术语和定义.pdf
- 《GB/T 32151.54-2025温室气体排放核算与报告要求 第54部分:工业硫酸企业》.pdf
- GB/T 32151.54-2025温室气体排放核算与报告要求 第54部分:工业硫酸企业.pdf
- 中国国家标准 GB/T 32151.54-2025温室气体排放核算与报告要求 第54部分:工业硫酸企业.pdf
- 中国国家标准 GB/T 29152-2025垃圾焚烧尾气处理设备.pdf
- 《T/CHTS 10170-2024半开级配超薄磨耗层技术指南》.pdf
- T/CHTS 10170-2024半开级配超薄磨耗层技术指南.pdf
原创力文档


文档评论(0)