ASME SECTION II C SFA-5.2-SFA-5.2M-2008 国外国际规范.pdf

2008a SECTION II, PART C SFA-5.2/SFA-5.2M SPECIFICATION FOR CARBON AND LOW-ALLOY A08 STEEL RODS FOR OXYFUEL GAS WELDING SFA-5.2/SFA-5.2M (Identical with AWS Specification A5.2/A5.2M:2007. In case of dispute, the original AWS text applies.) 1. Scope 2.2 The following AWS standards1 are referenced in the normative clauses of this document: 1.1 This specification prescribes requirements for the classification of carbon and low-alloy steel rods for oxyfuel (1) AWS A5.01, Filler Metal Procurement Guidelines gas welding. (2) AWS B4.0 [AWS B4.0M], Standard Methods for Mechanical Testing of Welds 1.2 Safety and health issues and concerns are beyond 2 the scope of this standard and, therefore, are not fully 2.3 The following ANSI standard is referenced in the normative clauses of this document: addressed herein. Some safety and health information can be found in Annex Clauses A5 and A10. Safety and health (1) ANSI Z49.1, Safety in Welding, Cutting, and Allied Processes information is available from other sources, including, but not limited to, ANSI Z49.1, Safety in Welding, Cutting, 2.4 The following ASTM sta