ASME SECTION II C SFA-5.7-SFA-5.7M-2008 国外国际规范.pdf

2008a SECTION II, PART C SFA-5.7/SFA-5.7M SPECIFICATION FOR COPPER AND COPPER-ALLOY A08 BARE WELDING RODS AND ELECTRODES SFA-5.7/SFA-5.7M (Identical with AWS Specification A5.7/A5.7M:2007. In case of dispute, the original AWS text applies.) 1. Scope standard are encouraged to investigate the possibility of 1.1 This specification prescribes requirements for the applying the most recent editions of the documents shown classification of copper and copper-alloy bare welding rods below. For undated references, the latest edition of the and electrodes for plasma arc, gas metal arc, and gas tung- standard referred to applies. sten arc welding. It includes compositions in which the 2 1 2.2 The following AWS standard is referenced in the copper content exceeds that of any other element. normative clauses of this document: 1.2 Safety and health issues and concerns are beyond (1) AWS A5.01, Filler Metal Procurement Guidelines. the scope of this standard and, therefore, are not fully 3 2.3 The following ANSI standard is referenced in the addressed herein. Some safety and health information can normative clauses of this document: be found in the info