压力容器外观及几何尺寸检验报告.docx

深度 深度 Depth≤0.5 mm，连 压力容器外观及几何尺寸检验报告 Appearance and geometry size inspection report of Pressure vessel 编号 No.：RT/ZZ-JL-12-09  产品编号 Product No.: 序号 图样及标准规定 检查项目 Check Items S/N Drawings and standard 实测结果 检查结论 ActualmeasurementConclusions of the results examination 产品总长 The total length of product mm 壳体内径 Shell ID mm 壳体长度 Shell length mm 壳体直线度 Shell Straightness mm 冷卷筒节投料的钢材厚度 Thickness of steel cold rolling mm 封头成形后最小厚度 Min.thicknessafterheadFormed mm 封头内表面形状偏差(外凸) Indide surface shape deviation of head mm  / eq \o\ac(□,合)eq \o\ac(□, )格(Y)eq \o\ac(□,不)eq \o\ac(□, )符合(N) eq \o\ac(□,合)eq \o\ac(□, )格(Y)eq \o\ac(□,不)eq \o\ac(□, )符合(N) eq \o\ac(□,合)eq \o\ac(□, )格(Y)eq \o\ac(□,不)eq \o\ac(□, )符合(N) eq \o\ac(□,合)eq \o\ac(□, )格(Y)eq \o\ac(□,不)eq \o\ac(□, )符合(N) eq \o\ac(□,合)eq \o\ac(□, )格(Y)eq \o\ac(□,不)eq \o\ac(□, )符合(N) eq \o\ac(□,合)eq \o\ac(□, )格(Y)eq \o\ac(□,不)eq \o\ac(□, )符合(N) eq \o\ac(□,合)eq \o\ac(□, )格(Y)eq \o\ac(□,不)eq \o\ac(□, )符合(N) 8 封头直边纵向皱折深度 Depth, head straight edge longitudinalShrink mm 不允许 Not allow  eq \o\ac(□,合)eq \o\ac(□, )格(Y)eq \o\ac(□,不)eq \o\ac(□, )符合(N) A 类焊缝最大棱角度 Max edge in Type A weld mm B 类焊缝最大棱角度Max edge in Type B weld mm A 类焊缝最大错边量Max wrong edge joint in Type A weld mm B 类焊缝最大错边量Max wrong edge joint in Type B weld mm 焊缝最大咬边深度，长度/连续长度 mm 13 Max edge binding Depth, length/Continuous length续咬边长度Continuous of the weld length≤100mm eq \o\ac(□,合)eq \o\ac(□, )格(Y)eq \o\ac(□,不)eq \o\ac(□, )符合(N) eq \o\ac(□,合)eq \o\ac(□, )格(Y)eq \o\ac(□,不)eq \o\ac(□, )符合(N) eq \o\ac(□,合)eq \o\ac(□, )格(Y)eq \o\ac(□,不)eq \o\ac(□, )符合(N) eq \o\ac(□,合)eq \o\ac(□, )格(Y)eq \o\ac(□,不)eq \o\ac(□, )符合(N) eq \o\ac(□,合)eq \o\ac(□, )格(Y)eq \o\ac(□,不)eq \o\ac(□, )符合(N) 14 焊缝余高 Weld extra Height 单面坡口 Single groove mm 0～ 双面坡口 Double groove mm 0～ eq \o\ac(□,合)eq \o\ac(□, )格(Y)eq \o\ac(□,不)eq \o\ac(□, )符合(N) eq \o\ac(□,合)eq \o\ac(□, )格(Y)eq \o\ac(□,不)eq \o\ac(□, )符合(N) 焊缝外观质量 Weld appearance quality 角焊缝质量 Angular weld quality 焊缝标识或标记 Weld Marks 端盖开合及连锁 Head cover opening/in