catia高级设计培训教材.ppt

Part Design Advanced;Course Presentation;Table Of Contents (1/2);Sketch-Based Features;3D Wireframe Elements;Holes/Pockets/Pads Not Normal to the Sketch Plane;Creating Pads and Pockets From Surfaces (1/2);Creating Pads and Pockets From Surfaces (2/2);Creating Grooves (1/5);Creating Grooves (2/5);Creating Grooves (3/5);Creating Grooves (4/5);Creating Grooves (5/5);Creating Ribs and Slots (1/5);Creating Ribs and Slots (2/5);Creating Ribs and Slots (3/5);Creating Ribs and Slots (4/5);Creating Ribs and Slots (5/5);Creating Stiffeners (1/2);Creating Stiffeners (2/2);Creating Lofts;Creating a Simple Loft (1/2);Creating a Simple Loft (2/2);Remove Lofts;Coupling (1/3);Coupling (2/3);Coupling (3/3);Dressing-Up Features;Thickness (1/2);Thickness (2/2);Advanced Drafts (1/5);Advanced Drafts (2/5);Advanced Drafts (3/5);Advanced Drafts (4/5);Advanced Drafts (5/5);Surface-Based Features;Surface-Based Features (1/4);Surface-Based Features (2/4);Surface-Based Features (3/4);Surface-Based Features (4/4);3D Constraints;3D Constraints (1/2);3D Constraints (2/2);Using Transformations;Using Transformations (1/3);Using Transformations (2/3);Using Transformations (3/3);Part Management;Measure, Scan, Parents-Children (1/3);Measure, Scan, Parents-Children (2/3);Measure, Scan, Parents-Children (3/3);Cut, Paste, Isolate, Break (1/3);Cut, Paste, Isolate, Break (2/3);Cut, Paste, Isolate, Break (3/3);Inserting and Managing Bodies (1/8);Inserting and Managing Bodies (2/8);Inserting and Managing Bodies (3/8);Inserting and Managing Bodies (4/8);Inserting and Managing Bodies (5/8);Inserting and Managing Bodies (6/8); The initial part is composed of three bodies. Assemble Body.1 to Part Body.; Change now Assemble.2 to Union Trim. You obtain :;Multi-Model Links;Sketch Selection with Multi-Document Links;Scaling;Customizing Local Axis;Customizing Local Axis (1/3);Customizing Local Axis (2/3);Customizing Local Axis (3/3);Tools;Analyzing Threads and Taps (1/2);Analyzing Threads and Taps (2/2);Draft Analys