德国麦能仪表CS52B_05_01.pdf

Conductivity Sensor •Very compact size for a high probe CS52B constant sensor. CS52B •O-ring seals used on all versions for high on-stream reliability. •Thermowell for the temperature element assures rapid response. This sensor was designed for open tank applications where it is desired to suspend the sensor by its cable rather than using a stand-pipe. Its most common application is in the plating industry, where it minimizes extra hardware in and around the tanks with their highly corrosive chemicals. Application Notes Wetted materials of construction are 316 stainless steel and CPVC, with double EPR O-ring seals. The outer O-ring is the only one to touch the process fluid, allowing the rear seal to operate free from chemical attack. The thermal containing the temperature sensing element in its tip is exposed directly to the stream, assuring rapid automatic com pensation for maximum accuracy. Process connections are 3/4-NPT for insertion, and the back portion is a barbed fitting for 1/2-ID flexible tubing attachment. The sensor can then be suspended by its cable without undue strain on the wires, or intrusion of chemicals down the stretched cable insulation. This allows extremely simple and inexpensive installations that do not require standpipes, brackets, etc.