ASME B46.1-2019 国外国际标准规范.pdf

ASME B46.1-2019 (Revision of ASME B46.1-2009) Surface Texture (Surface Roughness, Waviness, and Lay) A N I N T E R N A T I O N A L S T A N D A R D ASME B46.1-2019 (Revision of ASME B46.1-2009) Surface Texture (Surface Roughness, Waviness, and Lay) AN INTERNATIONAL STANDARD Two Park Avenue • New York, NY • 10016 USA x Date of Issuance: June 30, 2020 The next edition of this Standard is scheduled for publication in 2025. ASM issues written replies to inquiries concerning interpretations of technical aspects of this Standard. Interpretations are publishedonthe Committeeweb pageand under/InterpsDatabase. PeriodicallycertainactionsoftheASM B46 Committee may be published as Cases. Cases are published on the ASM website under the B46 Committee Page at /B46committee as they are issued. Errata to codes and standards may be posted on the ASM website under the Committee Pages to provide corrections to incorrectly publisheditems, orto correcttypographical orgrammatical errors incodes and standards. Such errata shall be used on the date posted. The B46 Committee Page can be found at /B46committee. There is an option available to automatically receive an e-mail notification when errata are posted to a particular code or standard. This option can be found on the appropriate Committee Page after selecting “Errata” in the “Publication Information” section. ASM is the registered trademark of The American Society of Mechanical Engineers. This international code or standard was developed under procedures accredited as meetingthe criteria for American National Standards anditisanAmerican Nation