基于ASCOM基带调治解调器的网管平台.ppt

  1. 1、本文档共23页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
AM-70 AM-70 基于ASCOM基带调治解调器的网管平台 集成网络接入 AM-70 现在运行的网络情况 容量 可混插 AM系列的任一种 NTU 数字交叉连接 提取和插入 广播 通过铜线或光纤进行2Mb/s中继传输 在2Mb/s光纤上进行1 + 1保护交换 容量 70 个Ascomstream 信道 (64k or 128k) 交叉连接 16 x 31 x 64kb 或对等的 16 x 2Mb 16 数据卡槽位 特性 灵活 永久连接 本地网管 - CST 远程网管 -48V 直流电源 电源冗余选择 特性 模块 前面板接入 诊断 - 测试环路 告警管理 电源掉电后自动恢复 卡 数据 AM-70-ULCAS-LC5----5路2。4K--128K AM-70-LECAR2---2MHDSL 传输 AM-70- MEGIF75 AM-70- MEGIF120 AM-70- TUNOP1 AM-70- TUNOP2 卡 数据接口卡 AM-70-UNIDA 控制卡 AM-70-CENCA 网管卡 AM-70-SIFOX 电源 AM-70-POSUP 选项 用户接口 数据卡 - AM-70-ULCAS-LC5 Compatible with AM64000, AM128000, AM64/128, AM-Analogue NTU CAP G703 Extender 2 MEG transmission over 2 pairs. 网络接口 铜线中继传输卡 光纤中继传输卡 数据卡 AM-70-ULCAS-LC5 5条信道 可与任何一种 NTU 以任何一种速率互连 软件配置 同样的传输性能 高速卡 2M-HDSL插卡---AM70-LECA2 2M 插卡线路驱动--即可远程供电 Carrierless Amplitude & Phase line code 2 对线 HDSL 点到点或点到多点 1 对线 1Mbps - 2 对线 2Mbps V.11, G.703, G.703/G.704 高速卡 2M-HDSL台式机器---AM70-LECAR LECA2 的台式版本 2Mbps 线路驱动 V.11, V.35, G.703, G.703/G.704, ISDN PRI, Ethernet Adapter Bridge or Router interfaces 数据接口 中继卡 AM-70-MEGIF 2 x 2M G.703 75 ohm and 120 ohm versions for transmission over copper AM-70-TUNOP 8M proprietary (as 4 x 2M) 1 port (1 x 8M) & 2 port (2 x 8M) versions for transmission over fibre 管理和控制选项 CST - Configuration Software Tool Local System Management Configure system (e.g set cross connections & unit options) Store settings Display alarms 现在电信的应用 The Am-70 is flexible. The line cards support any mix of NTU’s and data rates. If a free channel is available on a line card, then it can be configured to support any of the compatible AM-series NTU’s. Once the system is set up or configured, then the connections from tributary to trunk is permanent, stored in non-volatile memory - EEPROM. The system is managed “locally” by a PC directly connected to the rack using the Configuration software tool - the CST - a Windows based management tool. A small network of AM-70’s can be configured and controlled by this version of CST. For remote management there is a version of CST sti

文档评论(0)

559997799 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档