多路输出反激式开关电源设计要点.pdfVIP

多路输出反激式开关电源设计 摘 要:以UC3844 芯片为控制核心，设计并制作了多路输出反激式开关电源。完成 了多路输出反激式开关电源系统设计，完成具体模块电路详细设计，包括 EMI 滤 波电路、前级保护和整流桥电路、缓冲吸收电路、高频变压器、UC3844 的启动与驱 动电路、电流检测和过流保护电路等。合理选择、设计和分配了开关电源各电路参 数；设计出电路原理图，根据设计规范制作出 PCB，并组装出电源样机，最后对设 计的样机进行测试验证。 开关电源样机输出电压稳定性较高，输出电压纹波较小，符合设计规范小于 80mV 的要求；样机整体测试结果表明，电源各项指标均符合要求，输出稳定，性能 较好。 关键词：开关电源；反激式；UC3844 ；模块化 Design of Multi-output Flyback Switching Power Supply Abstract: It was designed and produced a set of multiple output fly-back switching power supply, using the chip UC3844 as the control core. The design of the system and specific module circuits was completed. The module circuits include EMI filter circuit, level protection and bridge rectifier circuit, snubber circuit, high frequency transformer, start and drive circuit of UC3844, current sensing and over-current protection circuit. The parameters of switching power supply circuit were chose, designed and distributed reasonably. According to the schematic circuit design and design specifications, we produced the PCB, and assembled the prototype of power supply, also finished the test in the final. The higher stability of the output voltage of the switching power supply prototype, the output voltage ripple is small, meet the design specifications to the requirements of less than 80mV; The prototype of the overall test results show that the power of the indicators are in line with the requirements, output stability, better performance. Keywords: switch power supply；flyback ；UC3844 ；Modular 目 录 南通农业职业技术学院学生毕业论文 多路输出反激式开关电源设计 1 概 述 1.1 课题研究背景与意义 随着电力电子技术的高速发展，电力电子设备与人们的工作、生活的关系日益 密切，而电力电子设备都离不开可靠的电源，其供电一般采用开关电源。开关电 是利用现代电力电子技术，控制开关管开通和关断的时间比率，维持稳定输出电压 的一种电源，开关电源一般由脉冲宽度调制（PWM ）控制IC 和 MOSFET 构成。在 建设资源节约型、环保示范型社会的大背景下，具有高效节能、安全环保、短小轻 薄等方面优点的开关电