GE触摸屏引脚定义.pdfVIP

4 Port 2: RS-485 Pin Assignments for Port 2 Port 2 is an RS-485 port with a 5-pin female D-sub connector. This can be attached directly to an RS-485 to RS-232 adapter. Pin Signal Direction Function SHLD -- Cable Shield Drain wire connection 2, 3, 4 n/c 5 P5V Output +5.VDC to power external devices (00mA max.) 6 RTSA Output Request to Send (A) output 7 GND -- 0V/GND reference signal 8 CTSB’ Input Clear to Send (B) input 9 RT -- Resistor Termination (20 ohm) for RDA’ 0 RDA’ Input Receive Data (A) input RDB’ Input Receive Data (B) input 2 SDA Output Transmit Data (A) output 3 SDB Output Transmit Data (B) output 4 RTSB Output Request to Send (B) output 5 CTSA’ Input Clear to Send (A) input Shell SHLD -- Cable Shield wire connection / 00% (Continuous) shielding cable shield connection GFK-1503D Chapter 4 Installation 4-15 4 Connector and Cable Specifications for Port 2 Vendor Part numbers below are provided for reference only. Any part that meets the same specification can be used. Cable: Low Capacitance Computer cable