3D打印与创客 选区激光熔化成形与设备 课件：SLM成型材料(中英）.pptxVIP

模块一 绪论 知识点3 SLM成型材料 单元二、3D打印成型工艺与设备 任务三 选区激光熔化成型与设备 《3D打印与创客》课程 任课教师 曾鹏 Module 1 introduction Unit 2. 3D printing molding process and equipment Task 1 Selective Laser Melting and equipment 3. Materials of Selective Laser Melting Lecturer Zeng Peng 问题导入 SLM成型材料有哪些？ 问题导入 Lead-in What are the materials of SLM? 目录 Contents mixed powder alloy powder Pure metal powder 1.混合粉末 混合粉末（见图）是将多种成分颗粒利用机械方法混合均匀后的产物。常用的混合方法是机械球磨法。利用这种方法的优点是混合粉经过适当配比，球磨混合均匀后的松装密度较高。 mixed powder Mixed powder (see figure) is the product of mixing various component particles uniformly by mechanical method.The common mixing method is mechanical ball grinding.The advantage of using this method is that When the mixing powder is properly proportioned and evenly mixed with ball grinding, the packing density is higher. 2.合金粉末 合金粉末是液态合金经过雾化方法制备的粉末，其粉末颗粒成分均匀。因此，利用预合金粉末成形，没有成分分布不均匀的不利因素。 alloy powder Alloy powder is a kind of powder prepared by atomizing liquid alloy with uniform particles .Therefore, there is no disadvantage of uneven distribution of components by using pre-alloyed powder forming. 2.合金粉末 常见牌号有EOS公司生产的A1Sil0Mg Speed 1.0 （4）铝合金 常用的SLM镍基合金主要有Inconel 625、lnconel 718及Waspaloy合金等 （3）镍基合金 主要研究的铁基合金包括Fe-C，Fe-Cu，Fe-C-Cu-P，不锈钢和M-2高速钢。 （1）铁基合金 不同组织的钛合金，具有重量轻、强度高、韧性好和耐腐蚀等特点。 （2）钛及钛合金 具有良好的导热、导电性能，和较好的耐磨与减磨性能 （5）铜合金 alloy powder Iron based alloy titanium and titanium alloy nickel base alloy aluminium alloy copper alloy The main study includes FE-C, FE-Cu, FE-C-CU-P, stainless steel and M-2 high speed steel. Titanium alloys with different structures are characterized by light weight, high strength, good toughness and corrosion resistance. The commonly used SLM nickel-based alloys are Inconel 625, Lnconel 718 and Waspaloy The common brand is the A1Sil0Mg Speed 1.0 produced by EOS It has good thermal and electrical conductivity, and good wear resistance and wear reduction 3.纯金属粉末 纯金属粉末是液态单质金属经过雾化方法制备的粉末，粉末的颗粒成分均匀。因此，SLM单质金属粉末成形不存在成分分布不均匀的不利影响。 Pure metal powder Pure metal powder is a kind of