专业英语 专业英语 练习题1.pptVIP

Lesson 1 Engine Construction Lesson 2 Engine Fuel System Lesson 3 Engine Ignition System Lesson 4 Engine Cooling System Lesson 5 Lubrication System Lesson 6 Automobile Engine Intakes Lesson 6 Automobile Engine Intakes Lesson 1 Engine Construction Lesson 2 Engine Fuel System Lesson 3 Engine Ignition System Lesson 4 Engine Cooling System Lesson 5 Lubrication System Lesson 6 Automobile Engine Intakes Lesson 6 Automobile Engine Intakes Questions for discussion What’s the main framework of an engine? What are the two types of piston rings? What are their functions？ What’s the purpose of the connecting rod? What is the function of the flywheel? Fill in the blank according to the text In aluminum blocks, the ____ usually installs cast-iron or steel cylinder sleeves (liners) because these metals can withstand the wear caused by the moving pistons better than ____ can. For instance, the engine will lose power due to ____ ____. Blowby describes the escape of unburned and burned gases from the ____ ____, past the ____, and into the ____. Automotive-type pistons have two kinds of rings; ____ and ____ control. Its function, along with the connecting rod, is to change the ____ ____ of the piston to rotary. Lastly, the crankshaft carries the total torque-turning or twisting effort-produced by the engine and delivers it to the ____. Questions for discussion What is the function of the fuel system? What are the major parts of the fuel pump? What is the difference between gasoline engines and diesel engines? What are the major parts of the TSI engine fuel system? Fill in the blank according to the text Metallic tubes or ____ ____ hoses used are called fuel lines. There are two types of gasoline engine pumps: ____ fuel pumps and ____ fuel pumps. The job of the fuel ____ used on gasoline engines is to remove dirt, rust, water, and other contamination from the gasoline before it can reach the ____ or the injection system. The mechanical fuel pump is driven