道达尔勘探开发 规范 GS_EP_PVV_630_EN.pdf

Exploration Production GENERAL SPECIFICATION PIPING VALVES VESSELS GS EP PVV 630 TOFD Inspection 03 01/2011 General review 02 10/2009 Acceptance criteria, personnel qualification ASME VIII 01 10/2008 General review 00 10/2006 First issue Rev. Date Notes Owner: EP/TDO/TEC Managing entity: EP/TDO/TEC/PVV This document is the property of Total. It must not be stored, reproduced or disclosed to others without written authorisation from the Company. Exploration Production General Specification Date: 01/2011 GS EP PVV 630 Rev: 03 Contents 1.  Scope 4  2.  Reference documents 4  3.  Definitions 6  4.  General remarks on the capabilities of the technique 6  5.  Examination levels 7  6.  Information required prior to testing 7  7.  Requirements for personnel and equipment 7  7.1  Personnel qualifications 7  7.2  Equipment8  8.  Preparation for testing 8  8.1  Volume to be inspected 8  8.2  Set-up of probes 8  8.3  Scan increment setting 8  8.4  Geometry considerations 9  8.5  Preparation of scanning surfaces 9  8.6  Temperatures 9  8.7  Couplant 9  8.8  Provision of datum points 9  9.  Testing of base material 9  10. Range and sensitivity settings 9  10.1  Settings 9  10.2  Checking of the settings 9  10.3  Reference blocks 9  11. Weld testing 10  12. In