8500kW风电场电气系统一次设计.docx

  1. 1、本文档共69页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
经典专科、本科、硕博、研究生、期刊毕业论文 仅供参考 PAGE 52 精心整理 仅供参考 勿用作商业用途 经典专科、本科、硕博、研究生、期刊毕业论文 仅供参考 精心整理 仅供参考 勿用作商业用途 摘要 风能作为一种情结能源而受到世界各国的重视,并加以开发和利用。通过技术开发,可以将风能转变为电能、热能、化学能等。其中,风能转化为电能是通过风力发电机将风能转化为电能,即风机桨叶在风力的带动下旋转,在大型风机中一般转速很低,正常情况下额定转速为20-30r/min,所以需要通过增速系统增速至1500r/min左右,再通过发电系统发出电能。在我国,风力发电总量逐渐增加,无论是在沿海地区还是内陆地区,在风能充足的地方,到处可见风力发电场,可见风电已经占据我国发电系统重要位置。 本论文阐述对象为风力发电场,设计10台单容量为850KW的风力发电机,风机发出690v的电经过箱式变压器升压到35kv后送入110kv升压站,再由升压站引出一回线路将电送入电网。本论文通过对风力发电场的电气一次设计过程的阐述,详细说明了风电场电力一次系统的设计过程。包括风机选择,35kV升压变压器选择,110kV升压变压器选择,断路器、隔离开关选择以及110kV侧SF6高压封闭式组合电器(GIS)选择。 在本设计过程中,参考了在本设计末所列出来的参考文献。限于本人水平能力,本设计难免有不足之处,所以真诚希望老师指正。 Abstract As a kind of clean energy, wind energy has been paid more and more attention by all countries in the world. With the development of technology, wind energy can be converted into electric energy, heat energy and chemical energy, etc. Among them, the conversion of wind energy into electricity is to convert wind energy into electrical energy by means of wind turbines, that is, the blade of the wind turbine is driven by the wind. in general, large fan speed is very low, under normal circumstances rated speed of 20-30r/min, so we need to speed up the growth rate of the system to about 1500r/min, and then Power generation by generating system. In China, the total wind power gradually increased, whether in coastal areas or inland areas, in places where wind power is abundant, wind farms can be seen everywhere, and it is obvious that wind power has occupied an important position in Chinas power generation system. This paper describes object is wind farms, Design the number of 10 unites wind turbines with a single capacity of 850kW. After the fan sends out the 690V electric power through the box type transformer to boost to 35kV , into the 110kV booster station, Then the power is put into a power network by one return circuit which is led out by booster station. In this paper, through about the wind power plant electrical once system design process exposition, incl

您可能关注的文档

文档评论(0)

584476383 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档