欧洲标准化委员会BS EN 00744-1996.pdfVIP

BRITISH STANDARD BS EN 744:1996 BS 2782-11: Method 1108C:1996 Plastics piping and ducting systems — Thermoplastics pipes — Test method for resistance to external blows by the round-the-clock method The European Standard EN 744:1995 has the status of a British Standard ICS 23.040.20 BS EN 744:1996 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee PRI/61, Plastics piping systems and components, upon which the following bodies were represented: British Gas plc British Plastics Federation British Plumbing Fittings Manufacturers’ Association British Valve and Actuator Manufacturers’ Association Department of the Environment (British Board of Agrément) Department of the Environment (Building Research Establishment) Department of the Environment (Property and Building Directorate) Department of Transport Electricity Association Federation of Civil Engineering Contractors Health and Safety Executive Institute of Building Control Institute of Materials