海上风电场运行尾流评估及对平价大基地微观选址的启示.pdf

海上风电场运行尾流评估 及对平价大基地微观选址的启示 Wake Assessments of Operating Offshore Wind Farm and Its Instruction on Micro-Sitting of Large-scale Zero-subsidy Wind Power Bases 2020.10 Beijing China *数据来源CWEA2019，统计数据截止2019年底 The statistics comes from CWEA2019, according to the end of 2019 2.909GW 41.4% 基于江苏某风场的后评估项目 Post-evaluation platform based on an OWF* in Jiangsu province 数据测试采集平台 * 海上风电场运行尾流评估流程 Procedures of wake Assessments on Operating OWFs step1风机偏航角校准 Calibration of WTGs yaw position angle(Force geographic north is zero) ↓↓↓ step2风机功率曲线测试，NTF函数测试 Testing of Power-Curve and nacelle NTF-function ↓↓↓ step3运行SCADA数据清洗 Cleaning of SCADA data ↓↓↓ step4运行工况分类 （风机工况、环境工况） Classification of operating scenarios ↓↓↓ step5数据分析 Data analysis ↓↓↓ step6实测数据vs数值计算 Operating data vs. numerical computation step1 ：风机偏航角校准 Calibration of WTGs yaw position angle(Geographic north is zero) BeiDou Satellite System 原始SCADA风玫瑰 approach 校准后全场SCADA风玫瑰 Windrose in SCADA Windrose after calibration step2 ：风机功率曲线测试，NTF函数测试 Testing of Power-Curve and nacelle NTF-function ➢ 实测功率曲线用于评估机组性能及风电场后评估电量测算 The measured power curve is used to evaluate the performance of the WTGs and AEP production calculation in post- evaluation ➢ NTF函数用于通过机舱测风还原每台风机在自由流扇区下叶轮前入流风速 NTF is used to calculate the free flow speed in front of the turbine rotor in free flow sectors step3 ：运行SCADA数据清洗 Cleaning of SCADA data 包括但不限于风机故障、停机维护、降功率运行以及风电场限电等工况需要被剔除 scenarios like turbine failure，maintenance,