怎样选择磁性元件.pdfVIP

张飞实战电子官方网站：☜点击打开 174 （广告勿扰100%拒绝水贴，10名疯狂工程师运营的网站，有问必答） 14th Edition Technical Information How to Choose Ferrite Components for EMI Suppression Introduction Conducted Limits* The following pages will focus on Soft Ferrites used in the Frequency Class A Class B application of electromagnetic interference (EMI) suppression. 450 kHz – 1.6 MHz 60 dBuV 50 dBuV Although the end use is an important issue and some applica- tions are mentioned, this technical section is not intended to be 1.6 MHz – 30 MHz 70 dBuV 60 dBuV a design manual, but rather, an aid to the designer in under- *Measured using a 50-ohm LISN standing and choosing the optimum ferrite material and compo- nent for their particular application. Ferrite suppressor cores Radiated Limits** are simple to use, in either initial designs or retrofits, and are comparatively economical in both price and space. Ferrite 30 MHz – 88 MHz 50 dBuV/m 40 dBuV/m suppressors have been successfully employed for attenuating 88 MHz – 216 MHz 53 dBuV/m 43 dBuV/m EMI in computers and related products, switching power sup- plies, electronic automotive ignition systems, and garage doors 216 MHz – 960 MHz 56 dBuV/m 46 dBuV/m openers, to name just a few.